Cutter Pumps SXC2824S
Cutter Pumps
The cutter pumps of the series SXC are designed to handle low alloyed steels, machining steel and cast iron / aluminum combinations. Chips can also be in the shape of birds nests or chip bundles, and must be supplied to the suction inlet of the pump. The chips are picked up by the agitator, broken up if necessary, cut, and then delivered by the pump.
The SXC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge.
For more information see lifting pumps features SXC/SPC within the technical information section.
Axial/semi-open impellers
Technical drawing
Cutter Pumps - SXC2824S
SXC2824S
Applications
| Types of fluid | coolants cooling/cutting oils on request |
| Max. chip to coolant ratio by weight: | 0.5 % |
| Chip material: | Low alloyed steel, machining steel, cast iron/aluminum combinations |
| Kinematic viscosity | ...200 SSU (...45 mm²/s) |
| Pumping temperature | 30...175 °F (0...80 °C) |
Construction
| Pump body | cast iron |
| Cover | cast iron |
| Impeller radial | cast steel |
| Cutting unit | coated (> 60 HRC) |
| Shaft | steel |
| Type | Flow at head | Height | Depth of immersion | Weight | Power (4-pole) |
Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | H inch | h inch | h mm | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | mm | kW | |||||||||||||||
SXC2824S480  |
200/45 750/14 |
31.9 809 |
18.74 | 476 | 427.8 | 194.0 | 10 7.5 |
460 | 60 |
|
1770 | ||||||
| 610 |
23.86 | 606 | 432.2 | 196.0 |
|
||||||||||||
| 730 |
28.58 | 726 | 438.8 | 199.0 |
|
||||||||||||