Cutter Pumps SPC820S
Cutter Pumps
The cutter pumps of the series SPC are designed to handle and reliably cut plastic Chips (no bundles).
The higher number of cutting blades results in an increased cutting frequency of all chips to be consistently cut into small pieces.
The SPC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge.
For more information see lifting pumps features SXC/SPC within the technical information section.
Axial/semi-open impellers
Technical drawing
Cutter Pumps - SPC820S
SPC820S
Applications
| Types of fluid | coolants cooling/cutting oils |
| Max. chip to coolant ratio by weight: | 0.3 % |
| Chip material: | Plastic |
| Kinematic viscosity | ...140 SSU (...30 mm²/s) |
| Pumping temperature | 30...140 °F (0...60 °C) |
Construction
| Pump body | cast iron |
| Cover | cast iron |
| Impeller radial | cast steel |
| Cutting unit | Hardened (>60 HRC) |
| Shaft | steel |
| Type | Flow at head | Height | Depth of immersion | Weight | Power | Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | H inch | h inch | h mm | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | mm | kW | |||||||||||||||
SPC820S230  |
100/32 400/9.5 |
19.8 503 |
9.13 | 232 | 156.6 | 71.0 | 5.1 3.8 |
230 | 60 |
|
3520 | ||||||
| 330 |
13.07 | 332 | 161.0 | 73.0 | 460 | 60 |
|
3520 | |||||||||
| 460 |
18.19 | 462 | 165.4 | 75.0 |
|
||||||||||||