CDU-Native. Reliable by Design.
AI-Ready Cooling Pumps
Pumps built for the next-generation AI infrastructure with scalable performance and seamless CDU integration.
Solving the Key Challenges in AI Data Center Cooling
As AI workloads generate increasing amounts of heat within ever smaller footprints, high performance liquid cooling systems have become essential. At the same time, they introduce new technical challenges regarding integration, reliability, and operation.
Managing this heat density safely requires innovative liquid cooling pumps that deliver precise and efficient fluid circulation across a wide range of cooling architectures.
Brinkmann Pumps addresses these challenges with purpose built CDU-native solutions designed for current and next generation data centers.
- How can I adapt my CDUs to rising heat densities in data centers?
Our pump platform is flexible and can be tailored to different cooling needs, helping you find the right fit for your specific system.
- How can rising energy consumption and pressure to improve PUE be managed?
As heat loads increase, flow requirements, and therefore pumping power, rises as well. At the same time, data center workloads continuously fluctuate. Our pumps are built to balance reliability with high wire-to-water efficiency, while adaptive speed control responds in real time to system demands. This allows energy use to be optimized, helping reduce both overall consumption and operating costs.
- How can the risk of leaks and vibration affecting sensitive IT infrastructure be reduced?
Most pumps rely on dynamic seals to prevent pressurized liquid from leaking where the rotating shaft meets the stationary housing, but these contact points are also a common source of failure. Our DCC pumps are designed to operate without dynamic seals, keeping fluids safely contained within the system. In addition, our liquid-cooled pumps run quietly with minimal vibration, helping to protect sensitive equipment.
- How can limited system visibility and the risk of unplanned downtime be addressed?
Brinkmann’s digital solutions integrate seamlessly with our pumps, giving you real-time insights, energy optimization tools, and early anomaly detection to help prevent downtime.
AI-Ready Cooling Pumps
Brinkmann Pumps combines engineering expertise with a flexible platform to develop application specific pump solutions. This ability makes our pumps a strong fit for a wide range of cooling architectures.*
Compact Cooling:
Pumps Designed for
In-Rack CDUs
Dielectric-Optimized:
Pumps Designed for
Immersion Systems
CDU-Native:
Pumps Designed for
In-Row & Gallery Systems
2-Phase:
Pumps Designed for
Phase-Change Systems
DCC120 | DCC200 | DCC300
RACK
Compact Cooling:
Pumps Designed for In-Rack CDUs
- Maximum performance, minimal footprint
- Built-in real-time monitoring
- Leak-proof design and silent operation
- Modbus connectivity for plug-and-play CDU integration
- Non-degrading components – protecting microchannels and maintaining long-term fluid purity
DCO1300-2500 | IH11-17
ROW & GALLERY
CDU-Native:
Pumps Designed for In-Row & Gallery Systems
- Engineered to deliver precise pressure to cold plates even with varying piping layouts
- VFD-ready IE3 – IE5 motors for industry-leading efficiency especially under low loads
- Optional liquid-cooled motor eliminating motor-fan losses
- Seal-less design options eliminating leaks and related maintenance
- Long service life with low noise and vibration
STC | TVG | HEF
IMMERSION
Dielectric-Optimized:
Pumps Designed for Immersion Systems
- Options for mineral oils and synthetic dielectric fluids, including higher viscosities
- Tank-mounted pumps require no seals and related maintenance
- Low vibration and noise for stable tank conditions
- Service-friendly design with motor separation interface
BMK3 | BMK4
2-PHASE
2-Phase:
Pumps Designed for Phase-Change Systems
- Seal-less designs to eliminate leakage of critical fluids
- Application specific impeller options reducing cavitation risk under varying load conditions
- Built-in real-time monitoring and CDU connectivity for full transparency
- Low noise and vibration for long-term reliability
- Designed for continuous operation in high heat-flux AI and HPC environments
* Not all configurations are available today. Contact us for a custom developed pump that fits your system.
Do you have any questions?
Give us a call, send us an email, or simply use our contact form.
Smarter Pumps Through Digital Integration
Brinkmann’s digital ecosystem integrates seamlessly with our pump portfolio, enabling precise multi-pump control, condition monitoring, and seamless CDU integration. It enhances reliability, transparency, and efficiency across the entire cooling system.
bplogic
Plug-and-Play Pump Control
• Coordinated multi-pump operation with built-in redundancy strategies minimizing thermal spikes
• Precise flow and pressure control for stable coolant delivery
• Data driven energy optimization
• Open platform architecture enabling CDU integration through Modbus RTU, Profibus, TCP/IP, and others
• Foundation for value-based service offerings
bpsense
Smart & Simple Condition Monitoring
• Compact, calibration-free 4-in-1 multi-sensor adapter with minimal installation effort
• Continuous monitoring of critical operating parameters
• Enabling insights into pump health and abnormal operating conditions such as cavitation, pressure spikes, or elevated air content
Brinkmann Pumps – Your Strong Partner for Data Center Applications
- Global presence with subsidiaries in the U.S. and Japan
- Representation in 20+ international locations
- Dedicated PhD-level engineers ready to take on demanding liquid cooling challenges
- Tailored solutions for glycolbased, dielectric, refrigerant, and specialty fluids
- Thousands of pumps installed in demanding environments:
- Industrial machinery
- e-mobility
- Power electronics
- Laser cooling
- Precision optics
- Engineered for continuous, high-reliability operation
- Advanced material expertise — protecting microchannels and maintaining long-term fluid purity
- Proprietary hydraulic and motor design expertise
- Multiphase fluid handling expertise
- Specialized sealing architectures (magnetic coupling, wet-rotor designs)
- ISO 9001 certified, comprehensive testing abilities and regulatory compliance (CE, UL, EMC)
Our team is happy to assist you!
Phone +1 248 926 9400
Fax +1 248 926 9405
E mail
Contact form