Immersion Pumps TA40...80
Immersion Pumps
are centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant.
The maximum coolant level must stay a few inches below the mounting flange.
The delivery capacities shown in the tables apply to water at 4.6 SSU (1 mm2/s) and 68°F (20°C).
For the delivery of oils, the values will decrease due to higher viscosities which result in an increased pipe resistance.
Semi-open impellers
Technical drawing
Immersion Pumps - TA40...80
TA40
TA80
Applications
| Types of fluid | coolants cooling/cutting oils |
| Kinematic viscosity | ...200 SSU (...45 mm²/s) |
| Pumping temperature | 30...140 °F (0...60 °C) |
Construction
| Pump body | cast iron |
| Cover | POM |
| Impeller | POM |
| Shaft | steel |
| Optional: | |
| Cover | cast iron with G 1 thread |
| Impeller | cast iron |
| Noise level | 48 dBA (TA40) 56 dBA (TA80) |
| Type | Flow at head | Depth of immersion | Thread | Weight | Power | Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | h inch | h mm | G | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | kW | ||||||||||||||||
TA40S90  |
10/13 35/4 |
3.54 | 90 | G ½ | 10.1 | 4.6 | 0.18 0.135 |
208-230 | 60 |
|
3250 | ||||||
| 120 |
4.72 | 120 | 10.6 | 4.8 | 460 | 60 |
|
3250 | |||||||||
| 170 |
6.69 | 170 | 11.0 | 5.0 |
|
||||||||||||
| 220 |
8.66 | 220 | 11.9 | 5.4 |
|
||||||||||||
| 270 |
10.63 | 270 | G ¾ | 13.0 | 5.9 |
|
|||||||||||
| 350 |
13.78 | 350 | 14.3 | 6.5 |
|
||||||||||||
| TA80S120 |
20/18 80/5.5 |
5.12 | 130 | G ¾ | 15.4 | 7.0 | 0.5 0.365 |
208-230 | 60 |
|
3400 | ||||||
| 170 |
7.09 | 180 | 15.9 | 7.2 | 460 | 60 |
|
3400 | |||||||||
| 220 |
9.06 | 230 | 16.3 | 7.4 |
|
||||||||||||
| 270 |
11.02 | 280 | 16.8 | 7.6 |
|
||||||||||||
| 350 |
14.17 | 360 | 17.4 | 7.9 |
|
||||||||||||