
Immersion Pumps TE/STE141...146
Immersion Pumps
are centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant.
The maximum coolant level must stay a few inches below the mounting flange.
The delivery capacities shown in the tables apply to water at 4.6 SSU (1 mm2/s) and 68°F (20°C).
For the delivery of oils, the values will decrease due to higher viscosities which result in an increased pipe resistance.
The STE pumps are equipped with the user-friendly 45 degree (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge.

Applications
Types of fluid | coolants cooling/cutting oils |
Kinematic viscosity | ...200 SSU (...45 mm²/s) |
Pumping temperature | 30...140 °F (0...60 °C) |
Construction
Pump body | cast iron |
Cover | cast iron |
PPS (TE141) | |
Impellers | PPS |
Shaft | steel |
Optional: | |
Cover | cast iron (TE141) |
Suction cover | with threaded G 1 ½ inlet |
Impellers | cast steel |
Other materials | on request |
Noise level | 62 dBA (TE141...STE142) 69 dBA (STE143...STE145) 73 dBA (STE146) |