Immersion Pumps in Plastics KTF151...KTF153
Immersion Pumps in Plastics
series KTF are suitable for various water supply applications.
These pumps are also suitable for a wide range of chemical liquids.
No shaft seal is required, due to the construction.
Semi-open impellers
Technical drawing
Immersion Pumps in Plastics - KTF151...KTF153
KTF151...153
Applications
| Types of fluid | Industry water; warm, cold, with and without chemical admixtures, distilled, de-ionnized |
| Kinematic viscosity | ...66 SSU (...12 mm²/s) |
| Pumping temperature | 15...140 °F (-10...+60 °C) |
Construction
| Pump body | POM |
| Cover | PP |
| Impellers | PPS |
| Shaft | Cr-steel |
| Optional: | |
| Shaft | CrMo |
| Noise level | 61 dBA (KTF151...KTF152) 68 dBA (KTF153) |
| Type | Flow at head | Height | Depth of immersion | Weight | Power | Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | H inch | h inch | h mm | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | mm | kW | |||||||||||||||
KTF151S140  |
35/32 120/12 |
10.4 264 |
5.51 | 140 | 19.2 | 8.7 | 1 0.725 |
208-230 | 60 |
|
3425 | ||||||
| 220 |
8.66 | 220 | 19.8 | 9.0 | 460 | 60 |
|
3425 | |||||||||
| 290 |
11.42 | 290 | 20.9 | 9.5 |
|
||||||||||||
| 370 |
14.57 | 370 | 21.4 | 9.7 |
|
||||||||||||
| KTF152S180 |
35/60 120/18 |
11.5 291 |
7.09 | 180 | 23.2 | 10.5 | 1.7 1.27 |
230 | 60 |
|
3440 | ||||||
| 260 |
10.24 | 260 | 24.3 | 11.0 | 460 | 60 |
|
3440 | |||||||||
| 330 |
12.99 | 330 | 25.4 | 11.5 |
|
||||||||||||
| 410 |
16.14 | 410 | 26.5 | 12.0 |
|
||||||||||||
| KTF153S220 |
35/95 120/28 |
13.6 346 |
8.66 | 220 | 45.2 | 20.5 | 2.6 1.95 |
230 | 60 |
|
3480 | ||||||
| 300 |
11.81 | 300 | 46.3 | 21.0 | 460 | 60 |
|
3480 | |||||||||
| 370 |
14.57 | 370 | 47.4 | 21.5 |
|
||||||||||||
| 450 |
17.72 | 450 | 48.5 | 22.0 |
|
||||||||||||