Vortex Pumps
SFT1300...1400

   
Semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Vortex Pumps
series SFT are designed to lift coolant for filtering. Coarse shreds can be transported together with liquids.
The pump inlet and pump discharge port have the same dimensions.
The SFT pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge.

SFT1300...1400
SFT1300...1400
yaxis SFT1300...1400
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
Max. chip to coolant ratio by weight: 1.5 %
Chip material: Aluminium, steel, coloured steels
Chip geometry: Flow chips up until 3.15 inch (80 mm) long
Kinematic viscosity ...140 SSU (...30 mm²/s)
higher viscosity upon request
Pumping temperature 30...140 °F (0...60 °C)
Construction

Pump body cast iron
Cover special cast iron
Impeller cast steel
Shaft steel
Technical data
Type Flow at head Height Depth of
immersion
Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch h inch h mm Lbs kg HP V Hz AMPS RPM
l/min /m mm kW
SFT1300S360    cad 200/36
800/10
22.6
574
14.29 363 341.8 155.0 10
7.48
230 60
23.0
3545
490    cad     19.41 493 352.8 160.0   460 60
11.5
3545
610    cad     24.13 613 361.6 164.0      
 
 
SFT1350S360    cad 200/50
800/15
24.1
612
14.29 363 366.0 166.0 13.8
10.3
230 60
31.6
3550
490    cad     19.41 493 377.1 171.0   460 60
15.8
3550
610    cad     24.13 613 385.9 175.0      
 
 
SFT1400S360    cad 200/65
800/19
24.4
620
14.29 363 419.0 190.0 16.9
12.6
230 60
39.2
3560
490    cad     19.41 493 430.0 195.0   460 60
19.6
3560
610    cad     24.13 613 438.8 199.0