Horizontal End-Suction Pumps
SBA401S...403S

Axial/semi-open impellers

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant  fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications.
The SBA pumps are equipped with the user-friendly
SAE flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBA401S...403S

SBA401S...403S

SBA401S...403S

Engineering drawing

yaxis SBA401S...403S
xaxis

Pump characteristic

Applications

Types of fluid coolants
cooling/cutting oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 62 dBA (SBA401S)
69 dBA (SBA402S...SBA403S)

Technical data

Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBA401S    cad 60/25
240/7
19.6 497 14.2 360 7.2 184 68.4 31.0 1.4
1.06
230 60
4.2
3440
  460 60
2.1
3440
SBA402S    cad 60/47
240/14
23.3 592 16.1 409 9.1 230 86.0 39.0 2.3
1.75
230 60
6.2
3470
  460 60
3.1
3470
SBA403S    cad 60/70
240/21
27.6 700 18.0 458 11.4 289 103.6 47.0 3.4
2.55
230 60
8.8
3480
  460 60
4.4
3480