Immersion Pumps in Plastics KTF61...KTF63
Immersion Pumps in Plastics
series KTF are suitable for various water supply applications.
These pumps are also suitable for a wide range of chemical liquids.
No shaft seal is required, due to the construction.
Semi-open impellers
Technical drawing
Immersion Pumps in Plastics - KTF61...KTF63
KTF61, 62, 63
Applications
| Types of fluid | Industry water; warm, cold, with and without chemical admixtures, distilled, de-ionnized |
| Kinematic viscosity | ...66 SSU (...12 mm²/s) |
| Pumping temperature | 15...140 °F (-10...+60 °C) |
Construction
| Pump body | PPS |
| Cover | PP |
| Impellers | PPS |
| Shaft | Cr-steel |
| Noise level | 55 dBA (KTF61...KTF63) |
| Type | Flow at head | Height | Depth of immersion | Weight | Power | Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | H inch | h inch | h mm | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | mm | kW | |||||||||||||||
KTF61S120  |
7.5/25 25/8 |
7.1 181 |
4.65 | 118 | 6.8 | 3.1 | 0.19 0.14 |
208-230 | 60 |
|
3200 | ||||||
| 170 |
6.61 | 168 | 7.1 | 3.2 | 460 | 60 |
|
3200 | |||||||||
| 220 |
8.58 | 218 | 7.3 | 3.3 |
|
||||||||||||
| 270 |
10.55 | 268 | 7.7 | 3.5 |
|
||||||||||||
| KTF62S150 |
7.5/50 25/15 |
7.1 181 |
5.94 | 151 | 7.9 | 3.6 | 0.3 0.22 |
208-230 | 60 |
|
3200 | ||||||
| 200 |
7.91 | 201 | 8.2 | 3.7 | 460 | 60 |
|
3200 | |||||||||
| 250 |
9.88 | 251 | 8.4 | 3.8 |
|
||||||||||||
| 300 |
11.85 | 301 | 8.8 | 4.0 |
|
||||||||||||
| KTF63S190 |
7.5/68 25/22 |
8.4 214 |
7.24 | 184 | 10.1 | 4.6 | 0.38 0.28 |
208-230 | 60 |
|
3200 | ||||||
| 240 |
9.21 | 234 | 10.6 | 4.8 | 460 | 60 |
|
3200 | |||||||||
| 290 |
11.18 | 284 | 11.0 | 5.0 |
|
||||||||||||
| 340 |
13.15 | 334 | 11.5 | 5.2 |
|
||||||||||||