DE 
Immersion Pumps
TA40...80
Semi-open impellers
Immersion Pumps
are centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant.
The maximum coolant level must stay a few inches below the mounting flange.
The delivery capacities shown in the tables apply to water at 4.6 SSU (1 mm2/s) and 68°F (20°C).
For the delivery of oils, the values will decrease due to higher viscosities which result in an increased pipe resistance.
TA40...80
Engineering drawing
 |
 |
||
 |
Pump characteristic
| Applications |
|||
| Types of fluid | coolants cooling/cutting oils |
||
| Kinematic viscosity | ...200 SSU (...45 mm²/s) | ||
| Pumping temperature | 30...140 °F (0...60 °C) |
| Construction |
|||
| Pump body | cast iron | ||
| Cover | POM | ||
| Impeller | POM | ||
| Shaft | steel | ||
| Optional: | |||
| Cover | cast iron with G 1 thread | ||
| Impeller | cast iron | ||
| Noise level | 48 dBA (TA40) 56 dBA (TA80) |
||
Technical data
| Type | Flow at head | Depth of immersion | Thread | Weight | Power | Voltage 3 ~ |
Fre- quen- cy |
Current | Speed | ||||||||
| GPM /Feet | h inch | h mm | G | Lbs | kg | HP | V | Hz | AMPS | RPM | |||||||
| l/min /m | kW | ||||||||||||||||
TA40S90  |
10/13 35/4 |
3.54 | 90 | G ½ | 10.1 | 4.6 | 0.18 0.135 |
208-230 | 60 |
|
3250 | ||||||
| 120 |
4.72 | 120 | 10.6 | 4.8 | 460 | 60 |
|
3250 | |||||||||
| 170 |
6.69 | 170 | 11.0 | 5.0 |
|
||||||||||||
| 220 |
8.66 | 220 | 11.9 | 5.4 |
|
||||||||||||
| 270 |
10.63 | 270 | G ¾ | 13.0 | 5.9 |
|
|||||||||||
| 350 |
13.78 | 350 | 14.3 | 6.5 |
|
||||||||||||
| TA80S120 |
20/18 80/5.5 |
5.12 | 130 | G ¾ | 15.4 | 7.0 | 0.5 0.365 |
208-230 | 60 |
|
3400 | ||||||
| 170 |
7.09 | 180 | 15.9 | 7.2 | 460 | 60 |
|
3400 | |||||||||
| 220 |
9.06 | 230 | 16.3 | 7.4 |
|
||||||||||||
| 270 |
11.02 | 280 | 16.8 | 7.6 |
|
||||||||||||
| 350 |
14.17 | 360 | 17.4 | 7.9 |
|
||||||||||||
