Horizontal End-Suction Pumps
SBG501S...503S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications.
The SBG pumps are equipped with the user-friendly SAE
flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBG501S...503S
SBG501S...503S
yaxis SBG501S...503S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
grinding oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 70 dBA (SBG501S)
73 dBA (SBG502S)
75 dBA (SBG503S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBG501S    cad 60/30
240/9
20.6 524 14.2 360 8.3 211 68.4 31.0 1.7
1.27
230 60
4.8
3440
  460 60
2.4
3440
SBG502S    cad 60/62
240/18
26.2 666 16.7 424 11.4 289 101.4 46.0 3.4
2.55
230 60
8.8
3480
  460 60
4.4
3480
SBG503S    cad 60/90
240/25
30.3 769 19.2 488 12.9 328 132.3 60.0 5.1
3.8
230 60
12.8
3520
  460 60
6.4
3520