Horizontal End-Suction Pumps
SBG1400S...1700S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications.
The SBG pumps are equipped with the user-friendly 45 degree 
flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBG1400S...1700S
SBG1400S...1700S
yaxis SBG1400S...1700S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
grinding oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 78 dBA (SBG1400S)
79 dBA (SBG1700S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBG1400S    cad 300/60
1200/17
31.2 793 16.7 424 16.3 414 264.6 120.0 13.8
10.3
230 60
31.6
3550
  460 60
15.8
3550
SBG1700S    cad 400/60
1600/17
31.6 802 19.5 495 16.6 422 324.1 147.0 20.1
15.0
230 60
48.2
3560
  460 60
24.1
3560