Horizontal End-Suction Pumps
SBA430S...433S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant  fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications.
The SBA pumps are equipped with the user-friendly
SAE flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBA430S...433S
SBA430S...433S
yaxis SBA430S...433S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 66 dBA (SBA430S)
73 dBA (SBA432S...SBA433S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBA430S    cad 100/38
400/11
22.4 569 14.1 359 10.1 256 88.2 40.0 2.6
1.95
230 60
7.0
3480
  460 60
3.5
3480
SBA432S    cad 100/82
400/24
27.8 705 16.7 423 12.9 328 127.9 58.0 5.1
3.8
230 60
12.8
3520
  460 60
6.4
3520
SBA433S    cad 100/118
400/34
30.3 769 19.2 487 14.1 358 134.5 61.0 7.7
5.75
230 60
19.0
3520
  460 60
9.5
3520