Horizontal End-Suction Pumps
SBA141S...143S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant  fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications.
The SBA pumps are equipped with the user-friendly
SAE flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBA141S...143S
SBA141S...143S
yaxis SBA141S...143S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 67 dBA (SBA141S...SBA142S)
71 dBA (SBA143S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBA141S    cad 25/32
100/9
18.0 456 14.1 359 5.6 143 58.4 26.5 0.73
0.54
208-230 60
2.8
3300
  460 60
1.4
3300
SBA142S    cad 25/53
100/14
22.6 575 16.1 410 8.3 211 70.6 32.0 1.7
1.27
230 60
4.8
3440
  460 60
2.4
3440
SBA143S    cad 25/83
100/21
25.7 653 17.5 444 10.1 256 92.6 42.0 2.6
1.95
230 60
7.0
3480
  460 60
3.5
3480