Immersion Pumps in Plastics
KTF61...KTF63

   
Semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Immersion Pumps in Plastics
series KTF are suitable for various water supply applications.
These pumps are also suitable for a wide range of chemical liquids.
No shaft seal is required, due to the construction.

KTF61...KTF63
KTF61...KTF63
yaxis KTF61...KTF63
xaxis
Applications

Types of fluid Industry water; warm, cold, with and without chemical admixtures, distilled, de-ionnized
Kinematic viscosity ...66 SSU (...12 mm²/s)
Pumping temperature 15...140 °F (-10...+60 °C)
Construction

Pump body PPS
Cover PP
Impellers PPS
Shaft Cr-steel
 
Noise level 55 dBA (KTF61...KTF63)
Technical data
Type Flow at head Height Depth of
immersion
Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch h inch h mm Lbs kg HP V Hz AMPS RPM
l/min /m mm kW
KTF61S120    cad 7.5/25
25/8
7.1
181
4.65 118 6.8 3.1 0.19
0.14
208-230 60
0.82
3200
170    cad     6.61 168 7.1 3.2   460 60
0.41
3200
220    cad     8.58 218 7.3 3.3      
 
 
270    cad     10.55 268 7.7 3.5      
 
 
KTF62S150    cad 7.5/50
25/15
7.1
181
5.94 151 7.9 3.6 0.3
0.22
208-230 60
0.95
3200
200    cad     7.91 201 8.2 3.7   460 60
0.55
3200
250    cad     9.88 251 8.4 3.8      
 
 
300    cad     11.85 301 8.8 4.0      
 
 
KTF63S190    cad 7.5/68
25/22
8.4
214
7.24 184 10.1 4.6 0.38
0.28
208-230 60
1.6
3200
240    cad     9.21 234 10.6 4.8   460 60
0.8
3200
290    cad     11.18 284 11.0 5.0      
 
 
340    cad     13.15 334 11.5 5.2