Pressure Boosting Pumps
FH17

60 Hz
nema
   
Closed impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Pressure Boosting Pumps
series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.

In addition, the TH series offers high pressures at short immersion depths.
Inline pumps of the series FH can be used as
boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 375 PSI (26 bar).
A frequency alternator can be supplied for special applications or for matching the pump characteristic to a specific duty point.
See page "Control/Regulation" in the Technical Information section of this catalog for further information. 

FH17
FH17
yaxis FH17
xaxis
Applications

Types of fluid Industry water
coolants
cooling/cutting oils
Kinematic viscosity ...115 SSU (...25 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impellers CrNi-steel
Shaft CrNi-steel
Diffusers CrNi-steel
Mechanical seal SiC
O-rings Viton ®
 
Noise level 74 dBA (FH1702...FH1703)
77 dBA (FH1704...FH1705)
79 dBA (FH1706...FH1708)
81 dBA (FH1709)
84 dBA (FH1710...FH1711)
Technical data
Type Flow at head Height Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m mm kW
FH1702S18    cad 75/120
300/37
29.2
741
8.3 212 132.3 60.0 5.1
3.8
230 60
12.8
3520
  460 60
6.4
3520
FH1703S28    cad 75/180
300/58
34.1
867
12.1 308 145.5 66.0 7.7
5.75
230 60
19.0
3520
  460 60
9.5
3520
FH1704S28    cad 75/260
300/80
37.1
943
12.1 308 200.7 91.0 11.5
8.6
230 60
27.8
3550
  460 60
13.9
3550
FH1705S38    cad 75/330
300/99
40.9
1040
15.9 404 264.6 120.0 13.8
10.3
230 60
31.6
3550
  460 60
15.8
3550
FH1706S38    cad 75/410
300/118
41.3
1048
15.9 404 271.2 123.0 16.9
12.6
230 60
39.2
3560
  460 60
19.6
3560
FH1707S47    cad 75/470
300/140
45.0
1144
19.7 500 277.8 126.0 20.1
15.0
230 60
48.2
3560
FH1708S47    cad 75/530
300/160
      282.2 128.0   460 60
24.1
3560
FH1709S57    cad 75/600
300/180
63.2
1605
23.5 596 339.6 154.0 25
18.5
460 60
28
3560
FH1710S57    cad 75/660
300/200
64.1
1629
23.5 596 381.5 173.0 30
22.0
460 60
34
3560
FH1711S66    cad 75/730
300/219
67.9
1725
27.2 692 385.9 175.0