Pressure Boosting Pumps
FH14

60 Hz
nema
   
Closed impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Pressure Boosting Pumps
series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.

In addition, the TH series offers high pressures at short immersion depths.
Inline pumps of the series FH can be used as
boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 375 PSI (26 bar).
A frequency alternator can be supplied for special applications or for matching the pump characteristic to a specific duty point.
See page "Control/Regulation" in the Technical Information section of this catalog for further information. 

FH14
FH14
yaxis FH14
xaxis
Applications

Types of fluid Industry water
coolants
cooling/cutting oils
Kinematic viscosity ...115 SSU (...25 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impellers CrNi-steel
Shaft CrNi-steel
Diffusers CrNi-steel
Mechanical seal SiC
O-rings Viton ®
 
Noise level 66 dBA (FH1402)
74 dBA (FH1403...FH1404)
77 dBA (FH1405...FH1407)
79 dBA (FH1408...FH1410)
81 dBA (FH1411...FH1412)
Technical data
Type Flow at head Height Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m mm kW
FH1402S18    cad 62.5/115
250/38
27.6
702
8.3 212 105.8 48.0 3.9
2.94
230 60
10.2
3480
  460 60
5.1
3480
FH1403S28    cad 62.5/180
250/58
33.0
837
12.1 308 136.7 62.0 6.1
4.55
230 60
15.8
3520
  460 60
7.9
3520
FH1404S28    cad 62.5/240
250/77
34.1
867
12.1 308 149.9 68.0 8.4
6.3
230 60
20.8
3510
  460 60
10.4
3510
FH1405S38    cad 62.5/305
250/96
40.9
1040
15.9 404 216.1 98.0 11.5
8.6
230 60
27.8
3550
FH1406S38    cad 62.5/370
250/111
      218.3 99.0   460 60
13.9
3550
FH1407S47    cad 62.5/430
250/128
44.7
1136
19.7 500 240.3 109.0 13.8
10.3
230 60
31.6
3550
  460 60
15.8
3550
FH1408S47    cad 62.5/490
250/147
45.0
1144
19.7 500 280.0 127.0 16.9
12.6
230 60
39.2
3560
  460 60
19.6
3560
FH1409S57    cad 62.5/560
250/165
48.8
1240
23.5 596 288.9 131.0 20.1
15.0
230 60
48.2
3560
FH1410S57    cad 62.5/620
250/184
      293.3 133.0   460 60
24.1
3560
FH1411S66    cad 62.5/685
250/203
67.0
1701
27.2 692 355.0 161.0 25
18.5
460 60
28
3560
FH1412S66    cad 62.5/730
250/222
      361.6 164.0