Horizontal End-Suction Pumps
SBG1101S...1103S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications.
The SBG pumps are equipped with the user-friendly 45 degree 
flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBG1101S...1103S
SBG1101S...1103S
yaxis SBG1101S...1103S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
grinding oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 76 dBA (SBG1101S)
79 dBA (SBG1102S...SBG1103S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBG1101S    cad 225/40
850/12
27.8 705 16.3 413 14.1 358 161.0 73.0 7.7
5.75
230 60
19.0
3520
  460 60
9.5
3520
SBG1102S    cad 225/76
850/24
34.0 863 19.4 492 17.2 437 258.0 117.0 13.8
10.3
230 60
31.6
3550
  460 60
15.8
3550
SBG1103S    cad 225/105
850/32
37.4 951 25.3 643 16.6 422 313.1 142.0 20.1
15.0
230 60
48.2
3560
  460 60
24.1
3560