Horizontal End-Suction Pumps
SBA901S...903S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant  fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications.
The SBA pumps are equipped with the user-friendly 45 degree 
flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBA901S...903S
SBA901S...903S
yaxis SBA901S...903S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 73 dBA (SBA901S)
78 dBA (SBA902S...SBA903S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBA901S    cad 175/46
700/14
26.4 671 16.1 409 12.9 328 145.5 66.0 5.1
3.8
230 60
12.8
3520
  460 60
6.4
3520
SBA902S    cad 175/95
700/28
32.0 812 18.9 479 15.7 399 227.1 103.0 9.2
6.9
230 60
21.2
3550
  460 60
10.6
3550
SBA903S    cad 175/140
700/42
36.2 919 21.6 548 17.2 437 273.4 124.0 13.8
10.3
230 60
31.6
3550
  460 60
15.8
3550