Horizontal End-Suction Pumps
SBA630S...1130S

   
Axial/semi-open impellers
dokument Technical datasheet
dokument Operating manual
document Questionnaire
arrow Engineering drawing 2D/3D

Horizontal End-Suction Pumps
are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft.
These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal.
Upon request a second mechanical seal is available to allow for dry-running (-GD).
This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant  fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications.
The SBA pumps are equipped with the user-friendly 45 degree 
flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with NPT 1/4.
For more information see mechanical features within the technical information section.

SBA630S...1130S
SBA630S...1130S
yaxis SBA630S...1130S
xaxis
Applications

Types of fluid coolants
cooling/cutting oils
Kinematic viscosity ...200 SSU (...45 mm²/s)
Pumping temperature 30...175 °F (0...80 °C)
Construction

Pump body cast iron
Cover cast iron
Impeller axial cast steel
Impeller radial cast steel
Shaft steel
Mechanical seal SiC
 
Noise level 73 dBA (SBA630S)
75 dBA (SBA930S)
80 dBA (SBA1130S)
Technical data
Type Flow at head Dimensions Length Weight   Power Voltage
3 ~
Fre-
quen-
cy
Current Speed
GPM /Feet H inch H mm h inch h mm l Inch l mm Lbs kg HP V Hz AMPS RPM
l/min /m kW
SBA630S    cad 200/60
800/16
27.6 701 16.1 408 14.1 358 145.5 66.0 7.7
5.75
230 60
19.0
3520
  460 60
9.5
3520
SBA930S    cad 250/65
1000/18
29.4 746 16.2 412 15.7 399 158.8 72.0 10
7.48
230 60
23.0
3545
  460 60
11.5
3545
SBA1130S    cad 450/75
1700/24
31.6 802 19.5 495 16.6 422 291.1 132.0 16.9
12.6
230 60
39.2
3560
  460 60
19.6
3560